≡ Menu

Waterjet

Here are some of the parts cut with the waterjet cutter. My main concerns are the surface finish of the cut and that the process is significantly slower (and so more expensive) than expected. As can be seen in the pictures, very fine detail can be put on the parts. The parts in these photos are 5/8 and 1.5 inches thick. The thicker the part, the more surface finish issues there will be. The pictures below can be clicked on for better detail.

Bismarck and Littorio Superstructure Parts

Bismarck Hanger 1

Bismarck Hangers 2

Bismarck Superstructure Detail